FabCO® Element™ 81K2C
Designed as a low Manganese (Mn) replacement for E81T1-K2C products. Meets all requirements of E81T1-K2C classification except for the minimum Mn requirement. This product offers reductions of Mn in the weld fume of 60-80% over a standard E81T1-K2C with low diffusible hydrogen as well as enhanced operator appeal and excellent out of positional capability.
AWS: A5.29: E81T1-GC H8
SDS: English (NA), Spanish (NA), French (NA), English (EU), Spanish (EU), French (EU)
Certification: Download PDF
Approvals: ABS
Product Sizes & Specifications
| Part Number | Diameter (IN) | Diameter (MM) | Package | Base Metal | Welding Process | Welding Position |
|---|---|---|---|---|---|---|
| S292419-029 | 1/16 | 1.6 | 33 Lb (15 Kg) Spool | mild steel | FCAW (flux cored) | all |
Industries
Heavy Equipment, Rail, General Fabrication, Shipbuilding
Applications
Excellent for applications where compliance with OSHA regulations, or NISOH and ACGIH recommendations for Manganese could be a concern, such as confined spaces or high volume manufacturing.
Similar Products
-
FabCO® XTREME® 120
All position gas shielding flux-cored wire designed for welding of offshore jack up rigs and high strength steels such as A514, A710, EQ56, and similar HSLA and Q&T steels
-
FabCO® XTREME® 85
All position gas shielding flux-cored wire designed for welding of X80 Grade transmission pipeline and offshore platforms and structural applications.
-
FabCO® XTREME® 95
All position gas shielding flux-cored wire designed for welding of X80 Grade transmission pipeline and offshore platforms and structural applications.
-
FabCO® 750M
All position gas shielding flux-cored wire designed for welding of offshore jack up rigs and high strength steels such as A514, A710, EQ56, and similar HSLA and Q&T steels
-
FabCO® 803
FabCO 803 is especially suited for those fine grained steels where low temperature CVN toughness is needed. Ideal for welding 2% Nickel steels. Provides a fast-freezing slag, low spatter, excellent arc characteristics, and high impact strengths at low temperatures.
-
FabCO® 811A1
All position flux-cored welding electrode for welding the 0.50% Molybdenum steel and other low alloy steels.
-
FabCO® 811N1
All position flux-cored wire used in applications where low temperature notch toughness is required. Can be used on weathering steels when color match is not required.
-
FabCO® 812-Ni1M
Designed for excellent mechanical toughness at lower temperatures in both the as welded and post weld heat treat conditions. All position wire with low hydrogen levels
-
FabCO® 81K2-C
All position wire designed for 100% CO2 gas. For mild and low alloy steel applications.
-
FabCO® 881K2
Designed for use in the off shore market due to its excellent impact resistance at low temperatures.
-
FabCO® 911B3
Suitable for use on materials having a similar composition, such as ASTM A387 or P21/P22 Pipe. Suitable for extended service at elevated temperature. Provides good puddle control and bead contour when welding in all positions. Provides versatility in procedure and application development.
-
FabCO® 91K2-C
All position wire formulated to allow for excellent mechanical toughness properties at lower temperatures in the as welded conditions.
-
FabCO® 91K2-M
Designed for excellent mechanical toughness at lower temperatures in the as welded conditions, while providing high weldability in all positions.
-
FabCO® 101
This wire minimizes the crack sensitivity in quench and tempered low alloy steels such as ASTM A514. Excellent impact properties at low temperatures.
-
FabCO® 110
This wire minimizes the crack sensitivity in quench and tempered low alloy steels such as ASTM A514.
-
FabCO® 111-V
High strength all-postion gas-shieled flux core wire used to join quench and tempered steels like ASTM A514